- Home
- ยป
- Our Products
- »
- Flue Gas Analyser
Flue Gas Analyser
Flue Gas Analyzer
Product Brochure
Storage temperature | -20 to +50 C |
Operating temperature | -5 to +45 C |
Power supply Battery | 1500 mAh, mains unit 5V/1A |
Display | Backlit 2-line display |
Weight with probe | Approx 700 g |
Dimensions | 201 x 83 x 44 mm |
Flue gas analysis the easy way....
The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of efficiency and flue gas loss are calculated. The instrument stands out thanks to its easy handling and menu-guided security. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy – even if you only have one hand free.
Some of other features of these analyzers are mentioned as under:
- Provides simple, self-explanatory measurement menus
- Rigid construction
- Ergonomic
- Tested according to EN 50379, Parts 1-3
Applications:
- Flue gas measurement
- Draught measurement
- Gas flow and static gas pressure
- Gas leak detection
- Ambient CO measurement
- Differential temperature measurement
Additional Information:
- Item Code: Testo-310
Portable Gas Analyzer
Product Brochure
Power Supply | Rechargeable battery pack 3.7 V / 2.6 Ah |
Weight | 600 g |
Storage temperature | -20 to +50 C |
Operating temperature | -5 to +45 C |
Mains unit | 6 V / 1.2 A |
Memory | 500.000 readings |
Dimensions | 270 x 90 x 65 m |
Our domain expertise has enabled us manufacture and supply a comprehensive range of Testo 330 LL . These products are manufactured by using modern machines and optimum quality material obtained from the authorized vendors of the market. The testo 330 LL is the professional flue gas Analyser which meets the highest requirements and is able to fulfill any measurement task. The sensors have an extended lifetime of up to 6 years. At least one sensor replacement is saved in the course of a normal working life. Testo furthermore gives 4 years’ warranty without a maintenance contract. Many measurement menus allow professional analyses on heating systems. 500.000 measurement values can be stored in the instrument.
Some of the features of these gas analyzers are mentioned as under:
- Testo 330 LL is TUV tested according to EN 50379, parts 1-3
- Extended lifetime of up to 6 years
- Graphically display of measurement data
- Sensor exchange by the user
- Dilution CO: Automatic dilution from 8,000 ppm
- Easy exchange of probes : By probe coupling
- Fast attachment: Magnetic to the burner/boiler
- Robust design
- Ideal for a technician’s daily work
- Lithium rechargeable battery
- Operation with lithium rechargeable battery (1500 mAh) up to 8 hours running time
- 500.000 measurement values can be stored in the instrument
Additional Information:
- Item Code: Testo-330-LL
Smart Flue Gas Analyzer
Product Brochure
Model | testo 330i |
Battery Backup | 3.7 V / 2.6 Ah |
Power Supply | Rech. batt. block 3.7 V 2.6 Ah |
Weight | 720 g |
Temperature | -20 to +50 |
Dimension | 270 x 160 x 57 |
Memory | 500000 readings |
General technical dataCompatability requires iOS 7.1 or newer /Android 4.3 or newerrequires mobile end device with Bluetooth 4.0Storage temperature -20 to +50 °COperating temperature -5 to +45 °CPower supply Rech. batt. block 3.7 V / 2.6 AhMains unit 6 V / 1.2 A (optional)Memory 500000 readingsWeight 720 g (excluding battery)Dimensions 270 x 160 x 57 mmWarranty Instrument/probe/gas sensors O2, CO:48 monthsGas sensor NO: 24 monthsThermocouple and rech. battery: 12 months
Testo 300
Model Name/Number | Testo 300 |
Brand | Testo |
Usage/Application | Flue Gas Analyser |
Automation Grade | Manual |
Weight | Approx. 800 g |
Power | Rechargeable battery, USB mains unit |
Humidity | 15 to 90 %RH, not condensing |
Testo 300- Truly Smart Flue Gas Analyser
The testo 300 flue gas analyzer combines decades of experience in measuring technology with contemporary smart-touch operation, robust construction and e-mailing of reports and is ideal for easy measurement of flue gas, draught, pressure, ambient CO and differential temperature.
Features:
-
Large scratch-resistant 5" HD display with smart-touch operation and replaceable protective film
-
Stored, intuitive menus for all relevant measurements
-
4 strong magnets with rubber coating for material friendly mounting
-
Ready to measure at the touch of a button in standby mode
-
Optional: extremely durable O2 sensor and automatic dilution up to 30,000 ppm CO
-
E-mailing of reports directly on site
High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports,
Emission Analyzer
Product Brochure
Weight | 960 g |
Dimensions | 283 x 103 x 65 mm |
Storage temperature | -20 to +50 C |
Operating temperature | -5 to +50 C |
Display Graphic display | 160 x 240 pixels |
Protection class | IP40 |
These gas analyzers are highly appreciated by the customers for their features mentioned as under:
- Compact design
- Least maintenance
- Easy installation & use
- Reliability
- Automatic flow-controlled gas pump modular gas sampling probe
Measurements for monitoring purposes:
- Industrial burners
- Stationary industrial engines
- Gas turbines
- Thermal processes
- TÜV approval / EN standard
- Accuracy approved for O2, CO2, CO, NO, NO low, °C, hPa to EN 50379 standard part 2
- Approved sensor change (adjustment without test gas)
- Automatic flow-controlled gas pump
- Modular gas sampling probes
- Internal data logging
- Option: Data transfer and real-time-analyzer-control via bluetooth® module and software easy emission
- 18 standard fuels and additional 10 user-defined fuels
- Fuel data is calculated using software easy emission
- Measurements for monitoring purposes
- Industrial burners
- Stationary industrial engines
- Gas turbines
- Thermal processes
- TÜV approval / EN standard
Additional Information:
- Item Code: Testo-340
Combustion Analyzer
Product Brochure
Weight | 573 Gram |
Storage temperature | -20 to +50 C |
Operating temperature | -5 to +45 C |
Power supply Battery | 3.7 V / 2,400 mAh |
Mains unit | 6 V / 1.2 A |
Display | Colour graphic display 240 x 320 pixels |
Memory | 500 measurement values |
Dimensions | 240 x 85 x 65 mm |
Combustion Analyser Testo 320 is a multi-function instrument for efficient flue gas analysis and which is still convenient to use. The testo 320 has a high-resolution colour display which presents the measurement results graphically. It provides simple, self-explanatory measurement menus. The testo 320 is very robust, ergonomic, and at the same time aesthetically designed. It has two sensors for O2 and CO as well as a temperature probe integrated into the flue gas probe for the direct measurement of temperature, O2 and CO. From these data, the instrument calculates all relevant flue gas measurement parameters such as CO2 value, degree of efficiency and flue gas loss. Direct draught or pressure measurements are additionally possible. Using the fine pressure probe, the flue draught or gas pressure values can optionally be measured parallel to the flue gas measurement. - TUV-tested according to EN 50379, Parts 1-3.
Applications
- Flue gas measurement
- Draught measurement
- Gas flow and static gas pressure
- Gas leak detection
- Ambient CO measurement
- Differential temperature measurement
Additional Information:
- Item Code: Testo-320
Portable Stack Gas Analyser
Product Brochure
Weight | 4800 g |
Power Supply | Power supply AC mains unit 100V to 240V (50 to 60 Hz) |
Max humidity load | +70 C dewpoint temperature |
Storage temperature | -20 to +50 C |
Operating temperature | -5 to +45 C |
Memory | 250,000 readings |
DC voltage input | 11 V to 40 V |
Dewpoint calculation | 0 to 99 Ctd |
- Flue gas analysis in commisioning, setting, optimization or operational measurements on industrial burners, stationary industrial engines, gas turbines and flue gas purification systems.
- Control and monitoring of officially prescribed emission limits in exhaust gas.
- Function testing of stationaryy emission measuring instruments.
- Control and monitoring of defined gas atmospheres in furnace rooms or kilns in different processes.
The new flue gas Analyser testo 350 offers advantages and real benefits
- Analyser box – industrial standard, robust and reliable
- Control unit – small and convenient
- Easily accessible service opening
- Thermally separated sensor chamber
- Easy exchange of the gas sensors
- Automatically monitored condensate trap
- External cooling loop
Additional Information:
- Item Code: Testo-350